5 Mistakes to Avoid when Building an Outdoor Privacy Fence

Install Fences in Canada

They say, if you’re doing a job, do it the right way. This holds true in every department. Although install fences in Canada is easier than ever, thanks to convenient kits, easy-to-handle materials, and inexpensive tools available at prevalent hardware stores, amateur blunders and oversights still happen all the time. So, if you’re planning to install fences in Canada, take a moment to review these measures that list down the various mistakes you can avoid while building your privacy fence.

  1. Placing gates in the wrong position– Although the construction stage is clearly important, don’t neglect the planning before the real work starts. Discovering the gates of your fences installed at a wrong position may be very annoying and disappointing. Moving gate posts can be difficult, time-consuming and expensive, so be sure of everything beforehand. Place them in well-drained areas, to avoid corrosion. Keep them out of the path of erosion, since traffic will only make matters worse. A building gate in Canada that opens onto a roadway should be set far enough back so that you can pull your vehicle off the road while you are opening the gate. Take into consideration your normal patterns of movement and install the gates where they will be most convenient. If you are fencing a pasture or a larger garden, a gate near the corner will encourage vehicle or foot traffic to move along the fence instead of cutting down the middle. If you’re confining livestock, a corner gate will let you drive animals along the fence.
  2. Incorrectly spaced posts– A solid and stable fence begins with a well-installed If you want your fences to withstand calamities and other elements of disaster, and hold up against panels and rails, you must set the posts deeply in the ground and anchor them properly. While spacing the posts, always keep in mind that spacing the posts little further apart from each other as compared to they ought to will save you a lot of space. This might work okay for a non-working fence. You don’t want to spend your free time fixing your fence because a goat knocked it down. Also, you don’t want to spend money to insert new posts to help strengthen the wire. So, if the fence post needs to be placed at 8 feet, then 8 feet it is.

P.S. Dig deeper and use a sturdier anchor than the minimum requirements as well. For example, most fencing systems need to be at least two feet into the ground and anchored with the concrete or gravel. In addition, give the posts time to set properly before beginning the next stage of the project.

  1. Unsecured anchor/ corner posts– Anchor/ corner posts are very important providing stability to the fence. They bear a lot of pressure, especially when constructing the fence. If you don’t secure them to the ground and support them with braces or other anchors, your fence will start to cave in. Or, your posts might even snap under pressure. Make sure your corner posts and your gate posts are firmly secured in the ground and properly buried.
  2. Not using the right kind of fence– Buying materials and putting up homestead fencing is an expensive and time-consuming proposition, so you must always do proper research and planning before installing a privacy fence. Firstly, you must start with your city’s planning commission. Since local zoning laws may restrict your choice, find out if any regulations pertaining to the fence design or construction in your area. Installing a fence that doesn’t pertain to the local regulations can restrict in having to take down your newly built fence and possibly pay a fine as well. Even when no local regulations restrict the choices, selecting the best fence isn’t always easy, since each system has inherent strengths and weaknesses. Exactly what type of fencing is best suited for you depends on what you’re trying to accomplish; keep animals in, keep animals out, or both. The right kind to install fences in Canada also depends on what species of animals are going to be confined, how big they are, and how motivated they are to get in or out. So, determine exactly what the purpose of the fence will be. Choose a type of fence which can withstand the demands of the foremost determined fence crashers. And make sure your chosen fence style conforms to local regulations.
  3. Fencing someone else’s property– Among some of the horrendous fencing stories we’ve heard, fencing a part of someone else’s property is probably the worst for a homeowner. Sometimes the mistake is discovered right away; other times it isn’t discovered until years later when one or other property is surveyed prior to being sold. So, if you are putting up a boundary fence, make sure to know your property line. Local restrictions may dictate how close you can place your fence to your property. You’ll also want to have a chat with your highway commissioner and check your deed to make sure you won’t be putting the fence in any wrong way. If you want to do a fence construction in Canada, and local regulations allow you to do so, your neighbour may be willing to share in the cost and maintenance. Get an agreement in writing, detailing all the specifics, where long-term maintenance is involved, record any agreement that allows you to enter the neighbour’s property to repair your fence. You and your neighbour may be best friends now, but tomorrow some old grouch may move in next door. In the event you can’t get a written agreement from your neighbour, build your fence sufficiently inside your property line that you can mow and otherwise maintain both sides. At the least, allow enough setback so concrete footers and other protruding parts won’t encroach on the neighbour’s land.

In addition to the above-mentioned mistakes, Team fencepro has listed down some additional mistakes customers tend to do while installing a privacy fence.

If you are planning to install an electric fence, don’t use different types of metals. When you hook up steel wire to copper, electrolysis happens and the metal becomes corroded, hence, making poor contact and weakening the shock power.

Gates can be tricky, especially for amateurs. First, take your time when choosing the best location because repositioning a gate can be expensive and difficult. Next, purchase the proper gate size. If the gate will only be used for foot traffic, it can be smaller, but if livestock or large farm equipment will pass through, you may need a gate that is 10-12 inches wide. Finally, as your gate will endure more wear-and-tear than the rest of the fence, it must be made from quality materials to prevent sagging and warping. The posts should be carefully set as well because their strength and durability is very crucial.

Additionally, make sure the underground utilities are clearly marked. If you do not mark your utility lines, the fence installers could potentially damage them. This damage can be expensive and time-consuming to fix on, so it’s worth taking time to mark them clearly.

So, now that you know the things that need to be avoided while installing a fence, we’re sure you’ll not make these mistakes in the future. However, if you want to learn additional information regarding the various types of fences’, contact the professionals at fencepro, probably the best installing fencing contractors in Canada. You can contact us at 905-922-4776 or drop us an email at info@fencepro.com.

Leave a Reply

Your email address will not be published. Required fields are marked *